Setting Up Your Sony Clié Handheld - Basics - Sony PEG-SJ20 Add-on Application Read This First Manual

Chapter 2

Setting up your Sony CLIÉ Handheld - Basics

This chapter describes basic hardware setup procedures that
you should perform, before you start using your CLIÉ
handheld in combination with your computer. These
procedures include: Supplying power to your CLIÉ handheld,
synchronizing data with your computer, and entering data.
Contents
Step 1: Supplying power to your Sony CLIÉ Handheld ............... 24
Installing the batteries (PEG-SL10) ...................................... 24
Charging your Sony CLIÉ Handheld (PEG-SJ20/PEG-SJ30) .... 26
Step 2: Turning on your Sony CLIÉ Handheld for the first time .. 28
Step 3: Entering data into your Sony CLIÉ Handheld ................. 32
Step 4: Installing the Palm™ Desktop for CLIÉ software
on your computer .......................................................... 34
Step 5: Connecting your Sony CLIÉ Handheld and
your computer via the USB cable .................................. 38
Connecting the USB cable (PEG-SL10) ................................ 38
Connecting the USB cable using the plug adapter
(PEG-SJ20/PEG-SJ30) ......................................................... 39
Step 6: Performing a HotSync
®
operation for the first time ...... 40