Parameter Descriptions; Time Offset, Image Profile - IBM Z9 Planning Manual

Figure 3-19. Time Offset, Image Profile

Parameter Descriptions

Offset Type or spin to the number of days, hours, and minutes you want to
set as the offset from the time of day supplied by its time source.
You can set an offset within the following range:
v 0 to 999 days
v 0 to 23 hours
v 0, 15, 30, or 45 minutes
Decrease system time value by the amount shown
Select this choice to set the logical partition's clock back from the
time of day supplied by its time source by the number of days,
hours, and minutes in the offset. Use this setting to provide a local
time zone WEST of GMT.
Increase system time value by the amount shown
Select this choice to set the logical partition's clock ahead of the
Chapter 3. Determining the Characteristics of Logical Partitions
3-61