Table of Contents
Advertisement
Building-in kit
The following items are supplied in the
accessory pack for installing the
appliance:
Carrying out installation
The appliance must be built in before
it can be used.
There are three spacers in the
accessory pack: one for the right-hand
side (R) and two for the left-hand side
(L), depending on whether the housing
unit wall is 16 or 19 mm thick.
Attach the correct left-hand spacer
applicable to the thickness of the
housing unit wall to one of the hooks
supplied.
Attach the other hook to the right-
hand spacer.
Before securing the hooks, make sure
that the screws are fitted where the
housing unit wall is at least 16 mm
thick.
Installation
19
Hide quick links:
Advertisement
Table of Contents
