Playing a Disc
The operations for normal play and the basic
operations during play are explained below.
Turn on the amplifier. Turn down the
volume level to the lowest.
Select the player position using the
input selector on the amplifier.
Press POWER on the player to turn on
Press A OPEN/CLOSE on the player to
open the disc tray, and place a disc on
With the label side up
To place other discs, press DISC SKIP
(or DISC SKIP +/– on the remote)
repeatedly and place the discs in the
order you want to play.
Each time you press the button, the disc tray
turns and you can place the discs in the
empty disc compartments. The player plays
the disc in front of you first.
Press PLAY MODE (or CONTINUE on
the remote) repeatedly to select ALL
DISCS or 1DISC Continuous Play
Each time you press CONTINUE on the
remote, "ALL DISCS" or "1 DISC"
appears in the display.
When you select
The player plays
All discs in the player
consecutively in the order
of disc number
Only the disc you have
Playback starts from the first track. If you
want to start playing from a specific track,
turn l AMS L (or press ./>
on the remote repeatedly) to select the track
number before pressing H.
Adjust the volume on the amplifier.
Basic operations during play
Do the following:
Press X or H.
Turn l AMS L (or press
Select a track
./> on the remote
Select a disc
Press DISC SKIP (or DISC SKIP
+/– on the remote) repeatedly.
By pressing DISC 1-5 on the
player, you can select a specific
Press A OPEN/CLOSE on the
Eject a disc
During playback, increase the volume level gradually
starting from the lowest level. The output from this
player may contain band width that is out of the normal
listening range. This may cause damage to the speakers
Selecting the playback layer
When playing a hybrid disc with an SA-CD
layer and a CD layer (page 5), you can select the
layer you want to listen to. Also, since both
layers are on one side, it is not necessary to turn
the disc over.
Press SA-CD/CD to select the desired
To select the default playback
Press MENU on the player.
Turn l AMS L (or press ./>
on the remote repeatedly) until "LAYER
SEL" appears in the display.