Replacing Discs While Playing A Disc - Sony SCD-C555ES Operating Instructions Manual

Using the Display
Displaying the information of a TEXT disc
in other languages
You can change the displayed language if the TEXT disc
has multi language capacity. When the player detects such
a TEXT disc, "TEXT" and "MULTI" appear in the display.
Change the language according to the procedures below.
1
Press MENU in stop mode.
2
Turn l AMS L until "LANGUAGE" appears in
the display.
3
Press l AMS L.
The current selected language (English, French,
German, etc.) flashes.
If the player cannot display the language used in a
TEXT disc, "Other Lang" appears in the display.
4
Turn l AMS L until the desired language
appears in the display.
5
Press l AMS L.
After a few seconds, the information appears in the
selected language.
18
US
Replacing Discs While
Playing a Disc
You can open the disc tray while playing a disc so that
you can check what discs are to be played next and
replace discs without interrupting play of the current disc.
1
Press EX-CHANGE.
The disc tray opens and two disc compartments
appear. Even if the player is playing a disc, it doesn't
stop playing.
2
Replace discs in the compartments with new ones.
The player plays the disc on the left side compartment
after the current disc, and then the one on the right
side compartment.
3
Press DISC SKIP.
The disc tray turns and other two disc compartments
appear.
4
Replace discs in the compartments with new ones.
5
Press EX-CHANGE.
The disc tray closes.
Note
Do not push the disc tray to close it in Step 5, as you may damage
the player.
While the disc tray is open by pressing the EX-CHANGE button
• If the play of the current disc ends, the player stops playing. If
the disc is played in 1 DISC Repeat Play mode (see page 21),
the current disc starts playing again.
• In ALL DISCS Shuffle Play mode (see page 22), tracks are
reshuffled on the current disc.
• In Program Play mode (see page 23), only the tracks on the
current disc are played.
EX-CHANGE
DISC SKIP