Reset Of Repaired Ssb; Total Overview Sam Modes; Option Code Overview; Ssb Identification - Philips 40PFL7007H/12 Service Manual

• Group 2 : 12232 04256 00164 00000
The first line (group 1) indicates hardware options 1 to 4, the
second line (group 2) indicate software options 5 to 8.
Every 5-digit number represents 16 bits (so the maximum value
will be 65536 if all options are set).
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.
Diversity
Not all sets with the same Commercial Type Number (CTN)
necessarily have the same option code!
Use of Alternative BOM => an alternative BOM number usually
indicates the use of an alternative display or power supply. This
results in another display code thus in another Option code.
Refer to Chapter 2. Technical Specs, Diversity, and
Connections.
6.4.4

Option Code Overview

Refer to the rearcover sticker in the set for the correct option
codes.
Important: after having edited the option numbers as
described above, you must press OK on the remote control
before the cursor is moved to the left!
6.5

Reset of Repaired SSB

A very important issue towards a repaired SSB from a Service
repair shop (SSB repair on component level) implies the reset
of the NVM on the SSB.
A repaired SSB in Service should get the service Set type
"00PF0000000000" and Production code "00000000000000".
Also the virgin bit needs to be set. To set all this, you can use
the ComPair tool or use the "NVM editor" and "Setup => TV
settings => General settings => Reinstall TV" (virgin mode).
After a repaired SSB has been mounted in the set (set repair
on board level), the type number (CTN) and production code +
12NC's (SSB, display and supply) of the TV has to be set
according the type plate of the set (no info on 12NC's here). For
this, you can use the NVM editor in SAM. This action also
ensures the correct functioning of the "Smart TV" feature and
6.6

Total Overview SAM modes

Table 6-11 SAM mode overview
Main Menu Sub-menu 1
Hardware Info A. SW version
B. Stand-by processor version e.g. "STDBY_83.84.0.0"
C. Production code
Operation hours
Errors
Reset error buffer
Alignment White point
Ambilight
Option numbers Group 1
Group 2
Store
Initialise NVM
Store
Alignments
6.5.1
Sub-menu 2 Sub-menu 3
e.g. "QF1EU_0.9.1.0
e.g. "see type plate"
Colour temperature Normal
Warm
Cool
White point red
White point green
White point blue
Select module
Brightness
Select matrix
e.g. "00008.00001.15421.02239"
e.g. "44816.34311.33024.00000"
back to
div. table
QFU1.1E LA
access to the Smart TV portals. The loading of the CTN and
production code can also be done via ComPair (Model number
programming).
After a SSB repair, the original channel map can be restored,
provided that the original channel map was stored on a USB
stick before repair was commenced and that basic functionality
of the TV, needed for this procedure, was not hampered as a
result of the defect. The procedure of "channel map cloning" is
clearly described in the (electronic) user manual.

SSB identification

Whenever ordering a new SSB, it should be noted that the
correct ordering number (12nc) of a SSB is located on a sticker
on the SSB. The format is <12nc SSB><serial number>. The
ordering number of the correct "Service" SSB is the one
preceded by the letter "S" in case 2 or more ordering numbers
are present on the bar code sticker.
Figure 6-1 SSB identification
Description
Display TV & Stand-by SW version and CTN serial
number
Displays the accumulated total of operation hours.TV
switched "on/off" & every 0.5 hours is increase one
Displayed the most recent errors
Clears all content in the error buffer
3 different modes of colour temperature can be
selected
LCD White Point Alignment. For values,
see Table 6-3 White tone default settings 40"
White tone default settings 46"
The first line (group 1) indicates hardware options 1
to 4
The second line (group 2) indicates software options
5 to 8
Store after changing
N.A.
Select Store in the SAM root menu after making any
changes
6. EN 41
18310_221_090318.eps
090319
to 6-5
2012-Sep-14