Sea-Bird Electronics SBE 19plusV2 User Manual page 91

88
Notes:
To prepare for redeployment:
1. After all data has been uploaded,
send InitLogging. If this command
is not sent, new data will be stored
after the last recorded sample,
preventing use of the entire
memory capacity.
2. Send QS to put the 19plus V2 in
quiescent (sleep) state until ready
to redeploy. Quiescent current
is only 20 microamps, so the
batteries can be left in place
without significant loss of capacity.
Section 4: Deploying and Operating SBE 19plus V2
9. Ensure all data has been uploaded by reviewing and processing the data:
A. Use SEASAVE to display and plot the raw hexadecimal data in
engineering units (see Verifying Contents of .con File and
SEASAVE's manual/Help files).
B. Use SBE Data Processing to process and plot the data (see
Processing Data Using SBE Data Processing and SBE Data
Processing manual/Help files).
81