To Start/Stop Recording In Sync With The Sound Source (Synchro-Recording) - Sony Walkman MZ-NF610 Operating Instructions Manual

On the remote control
1
Press DISPLAY.
Each time you press the button, the
display changes as follows:
Display window on the remote control
C
Display: C/D
C
Track number
Track number
The number of
the track in the
group
The number of
tracks in the disc
Track number
Note
Depending on whether the group function is
used or not, the operating conditions, and the
disc settings, you may not be able to select
certain indications or the indications may
appear different.
z
For more details about the indications in the
display while playing, see "Viewing various
information" (page 36).
30
D
D
Elapsed time
Track name
Group name
Disc name
The name of the
sound mode
To start/stop recording
in sync with the sound
source
(Synchro-recording)
During synchro-recording, the recorder
starts and stops recording in sync with the
sound source. When recording from
digital equipment (such as a CD player),
you can omit operating both the recorder
and the sound source, and easily make
digital recording. You can make synchro-
recording only when the optical cable is
connected.
MENU
4-way control key
(ENTER • N, ., >, x)
1
Make connections.
Use the appropriate optical cable to
suit the source equipment. Connect
the cable firmly to the appropriate
jacks.
2
While the recorder is stopped, press
MENU.
3
Press . or > repeatedly until
"R-SET" appears in the display, and
then press ENTER.
4
Press . or > repeatedly until
"SYNC-R" appears in the display,
and then press ENTER.
5
Press . or > repeatedly until
"ON" appears in the display, and then
press ENTER.
REC • T MARK