Messages - Sony MZ-M100 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual

Symptom
The operation mode of
the blank 60/74/80-
minute standard disc
differs from the mode
following formatting or
the mode selected in the
SonicStage software.

Messages

If the following messages flash in the display window on the recorder, check the chart
below.
Message Meaning/Remedy
AVLS NO • AVLS is set to "On" and so the volume cannot rise higher.
VOLUME
OPERATION
BLANKDISC • A disc with no recording on it is inserted.
BUSY WAIT A • The recorder is accessing disc information.
MOMENT • You tried to operate the recorder while it was accessing the recorded data.
CANNOT EDIT • You selected, "Group Set", "GroupRelease", "Move", or "Erase" while
• You tried to erase the track mark at the beginning of the first track or
• You tried to erase a track mark to combine tracks the recorder cannot
• You tried to overwrite a track marks.
• You tried to change a title that includes characters the recorder cannot edit.
• You tried to press X or T MARK during synchro-recording.
CANNOT
OPERATE
CANNOT PLAY • You tried to play a track that is subject to play restrictions.
• You tried to play an MP3 track with a format not supported by this
CANNOT • You tried to record on a disc that has already been recorded in MD mode.
RECORD
Cause/Remedy
• When using a blank 60/74/80-minute standard disc in the recorder,
the operation mode set in the "Disc Mode" menu is applied.
, Use the "Disc Mode" menu to change the operation mode as
desired.
, Set AVLS to "Off" (page 57).
, Wait until the message goes out (in rare cases, it may take a few
minutes).
recording.
group.
combine (a track recorded in stereo and in mono, for example).
, Editing titles cannot be done if the title includes characters that cannot
be input on the recorder.
recorder.
, This recorder only supports MP3 tracks (MPEG-1 Audio Layer-3/
sampling frequency 44.1 kHz) that have been transferred using the
SonicStage software.
, On this recorder, you cannot do additional recording on a disc that is
already recorded in MD mode. If you want to do additional recording
on such a disc, connect the recorder to a Windows computer and use
the supplied SonicStage or MD Simple Burner software.
79