Sony MZ-M100 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual page 80

Message
CANNOT
RECORD OR
PLAY
CANNOT SET
Charging
DATA SAVE
DC IN TOO
HIGH
DISC FULL
DOWNLOAD
READY
EJECT DISC OK • The recorder has finished communicating with the computer and it is safe
END
ERROR
ERROR XX
FOLDER NO
EXPAND
FORMAT
ERROR DISC
80
Meaning/Remedy
• There is no audio data that can be played on the recorder.
• The audio data or disc management file has been damaged.
, Erase the whole disc (page 53) or perform the Format function
(page 56).
• You tried to set "Time Mark" during synchro-recording.
• You selected "REC Level" while the recorder is not in recording-pause.
, Set "REC Level" while the recorder is in recording-pause.
• You tried to make the following settings while recording.
— Recording mode
— Disc Memory
— Play mode
— Selection of "Group REC" in menu
• The rechargeable battery is being charged.
• The recorder is writing information to the system file, such as the recorded
data or editing information.
, Wait until the message disappears from the display.
• Voltage of the power supply is too high (The supplied AC power adaptor is
not used).
, Use the supplied AC power adaptor.
• Recording may not be done if the remaining recordable time on the disc is
48 seconds or less.
, Replace the disc.
• MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to "Software Operation" section.)
to eject the disc from the recorder or disconnect the USB cable.
• The recorder reached to the end of the disc while playing or pressing >.
• There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 78.
• There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 78. If the message
appears again, please consult your nearest Sony dealer.
• You tried to use the File List function to expand a folder that is already at
the 16th level.
, Files and folders can be expanded down to 16 levels. Expansion
beyond this level is not possible.
• A disc with a format that the recorder does not support was inserted.
, Insert a disc used in Hi-MD mode.
• A disc formatted on a computer was inserted.
, A disc formatted on a Windows or Macintosh computer cannot be
used. Format the disc on the recorder or with the SonicStage software.