Table Of Setup Menus - Sony MXD-D4 Operating Instructions Manual

Table of Setup Menus

You can make various settings on this deck by using Setup Menus. Operation related to each menu were explained
in the previous sections. The table below outlines each menu, including the various parameters and initial settings.
Note
The menus you can use while the deck is stopped, playing or recording differ.
To enter the Setup Menu
While the deck is stopped, press MENU/NO twice to display "Setup Menu."
Menu
Function
T.Mark Sets the Track Marking Function.
LS (T) Changes the trigger level for Track
Marking Function.
S.Space Sets the Smart Space and Auto Cut
Functions.
F.in Sets the fade-in time.
F.out Sets the fade-out time.
Pitch Changes the playing speed by auto
steps.
Pfine Fine controls the playing speed.
CD Adjusts the input level from the CD
player section.
Opt Adjusts the input level from the
DIGITAL OPTICAL IN connector.
Anlg Adjusts the input level from the
ANALOG IN jacks.
LPstamp Sets whether to automatically add
"LP:" at the beginning of a track name
during a long time recording.
To reset to the initial setting
Press CLEAR while the respective Setup Menu is displayed.
Additional Information
Parameters Initial setting
LSyn/Off LSyn
–72 to 0dB –50dB
On/Off On
1.0s to 15.0s 5.0s
1.0s to 15.0s 5.0s
–36 to 0 0
–87.5 to 0.0% 0.0%
– dB to +12.0dB 0.0dB
– dB to +12.0dB 0.0dB
– dB to +12.0dB 0.0dB
On/Off On
See
page 24
page 25
page 20
page 27
page 27
page 18
page 18
page 23
page 23
page 23
page 23
49