Button Function - Sinclair SDV5 User Manual

6. BUTTON FUNCTION

DSP1
SW5 SW4
MENU DOWN
6.1 Button switch function
MENU: Long press 5 seconds to enter menu function mode,
1)
short press return to the previous menu
OK：Short press to enter the next level menu or confirm the
2)
selection
3) UP/DOWN：
a) Select different menus in menu function mode.
b) System check when it is not menu function mode.
6.2 Menu function mode
Only master unit has the full menu functions, slaves units only
have error codes check and cleaning menu functions.
1.
Long press "MENU" button 5 seconds, then display "n1", and
enter the menu function mode.
a)
Use "UP" and "DOWN" to select a different level 1 menu
(for example,n3)
b)
Press "OK" to enter a level 2 menu (for example,n31)
2.
At level 2 menu status
a)
Use "UP" and "DOWN" to select different level 2 menu (for
example,n32)
b)
Use "OK" to confirm the specified level 2 menu
DSP2
SW3 SW6
UP OK
MENU Description
n14 Debug mode 1
n15 Debug mode 2
n16 Maintenance mode
n24 Reserved
n25
Reserved
n26 Backup run
n27 Vacuum mode
n31 History codes
Cleaning history error
n32
Reserved
n33
n34 Restore factory settings
Power limitation mode 1
n41
n42 Power limitation mode 2
Power limitation mode 3
n43
Power limitation mode 4
n44
n45 Power limitation mode 5
n46
Power limitation mode 6
n47
Power limitation mode 7
nb1 Fahrenheit degree (°F)
nb2 Celsius degree (°C)
nb3 Exit auto power save mode
nb4 Enter auto power save mode
nb5 Auto snow-blowing mode 1
nb6
Auto snow-blowing mode 2
nb7 Exit auto snow-blowing mode
nb8 VIP address setting
nF1 Reserved
nF2 Reserved
Only available for master unit(all indoor units running in cooling mode)
1
Only available for master unit(if all the indoor unit in the system are the
2
2nd generation indoor units, all the indoor units will run in heating mode.
Once there is one or more old indoor unit in the system, all the indoor
units will run in force cooling mode)
Only available for the master unit, the system does not check the indoor
3
units' number.
Only available for outdoor unit with two compressors. If one of the two
4
compressors is fail, the other compressor will keep running for up to 4
days and then stop automatically.
Only available for the master unit
5
Only available for the master unit, 100% capacity output
6
Only available for the master unit, 90% capacity output
7
Only available for the master unit, 80% capacity output
8
Only available for the master unit, 70% capacity output
9
Only available for the master unit, 60% capacity output
10
Only available for the master unit, 50% capacity output
11
Only available for the master unit, 40% capacity output
12
5
Table 6-1
Note
1
2
3
4
Display"R006"
5
6
7
8
9
10
11
12
Only available for master unit
Only available for master unit
Only available for master unit
Only available for master unit