Table of Contents
Advertisement
To charge the battery, pull the rubber cap with the USB sign situ-
ated on the side of the Braster device next to the ON/OFF button�
Connect one end of the USB cable to the Braster device and the
other end to the charger (the plug is not included in the set)� Con-
nect the charger to a power source (see Fig. 11)�
When the device is connected to the charger, the device power
status indicator will be lit as steady orange� The indicator switches
itself off when the battery is fully charged� Full charging takes ap-
proximately three hours� The device must be disconnected from
the power source via the USB cable, which must be safely discon-
nected from the mains supply when the charging is complete�
Fig� 11: Location of the USB slot
10. SAFE OPERATION
Follow the recommendations below to ensure the safe operation
of the Braster device:
Before you use the device for the first time, charge the battery
l
using the USB cable provided�
Only use accessories and materials supplied or recommended
l
by the manufacturer�
USB slot
Mini-USB slot
33
Advertisement
Table of Contents
