7�2�6� Matrix Selection - Braster Pro User Manual

zation can you be sure that the results will be reliable�
To complete the acclimatization process, follow the instructions
displayed on subsequent mobile app screens�
7.2.6. MATRIX SELECTION
At this stage, you need to select the matrix for the examination�
Your Braster device was provided with a set of three matrices�
Each of them works in a different range of temperatures� In order
to produce a high-resolution thermographic image that will show
the distribution of temperatures across the patient's breasts, you
will need to select a matrix before each examination�
To select a matrix, make one application of the Braster device to
the central area of each breast� The mobile app will guide you
step by step through this process�
First place matrix no� 2 in the device (the number of the matrix is
stated on the plastic frame)� Follow the instructions displayed on
subsequent screens�
! START THE MATRIX SELECTION WITH THE RIGHT BREAST.
When instructed apply the device centrally to the breast and press
the grip (see Fig� 3: to see the location of the grip)� The clicking
sound means that the grip has been pressed correctly� Remember
to hold the grip down as long as the examination is in progress�
Make sure, that the whole matrix adheres tightly to the body� Do
not move the device across the breast, hold it firmly in one place�
When instructed, release the grip and move the device away from
the breast (see Fig� 6)�
24