7�2�3� Device Connection; 7�2�3�1� Connecting To A Device With Ios Lower Than - Braster Pro User Manual

vice on and connect it to the mobile device once again to continue�
7.2.3. DEVICE CONNECTION
Establishing a connection between the Braster device and a mo-
bile device differs slightly for Android and iOS 11 and higher and
iOS lower than 11�
To connect the Braster device follow the instructions displayed on
subsequent screens on your mobile device�
Position the device to see the label with the name of the Braster
Wi-Fi signal and password� The label is inside the device and is
visible only when the matrix has been removed (Fig� 4A & 4B)�
7.2.3.1. Connecting to a device with iOS lower than 11
Click "Settings" on the connection screen� Go to the Wi-Fi set-
tings� From the list of Wi-Fi signals select the Braster signal spec-
ified on the label and enter the password� Return to the mobile
app� A message will display information whether a connection has
been established successfully�
Do not worry if you went back to the main screen of your mobile
device and not to the mobile app directly, you may go back to the
application again� At this point you should already be connected
to the device�
If, for some reason, you are unable to go to the Wi-Fi settings on
the connection screen in the mobile app, leave the app, go to
"Settings" in your mobile device, select the "WiFi" tab and select
the signal of your Braster device and enter the password� After-
wards, you may return to the app�
7.2.3.2. Connecting to an Android device and iOS 11 and higher.
At the first examination, provide your device data by entering the
network's name and password (the network's name and password
are given on the device label located inside the device)� A mes-
sage will be displayed notifying you whether a connection has
22