Activate And Welcome Screen; Connecting Wi-Fi Module To Smart Phone - Daewoo DSB-F0902ELH-VKW Use & Care Manual

Activate and Welcome screen

1. Launch the APP by tapping the TFIAC icon.
2. The first time to use the app will pop up the activate
screen, in the next time it will pop up the welcome
screen.
Tap this button and use
the camera to scan the
QR code
Or Input the activation
code as item 3
Tap the activate button
to activate the APP

Connecting Wi-Fi module to smart phone

Connecting Wi-Fi module to smart phone as these steps:
Step1. Connect smart phone to the
the indoor unit (Launching the Air conditioner
is not necessary).Check if it shows "CF" on the
display.
(Means the Wi-Fi
Wi-Fi ).
Step2. Tap "Add Device" button on the Device List
screen.
Step3. On the Add Device screen, type the router
name in text "
select "Show" if you want to see the password.
Step4. Tap the "Start Config" button to configuration
process.
Scan QR code
OR
enter activation code
activate
Wi-Fi , power on
module is disconnected from
Wi-Fi :", then type the password,
3. Activate QR code and activation code
Note Without the QR code or activation code,
you can't active the APP and using it,
please keep them safe.
Device List
Add Device
About
4
DAEWOO
Back
Add Device
Add new device
Wi-Fi:
Password:
Show
Start Config