Input And Output Jacks - Sony MDS-DRE1 Operating Instructions Manual

Input and Output Jacks

Front panel
EJECT
1 § EJECT button (12)
Press during stop to eject the disc.
If there is TOC data that has not yet been written to
the MD (if the TOC indicator is lit), the unit writes the
TOC data to the MD before it is ejected.
2 Disc slot (11, 23)
Insert an MD into this slot.
3 PHONES jack
This is a standard phone jack for connecting stereo
headphones.
4 PHONE LEVEL knob
Use to adjust the headphone volume.
10 GB
Rear panel
MIN MAX
PHONES PHONE LEVEL
1 LINE (ANALOG) IN jacks (5)
2 LINE (ANALOG) OUT jacks (5)
3 DIGITAL COAXIAL IN jack (5)
4 DIGITAL OPTICAL IN jack (5)
5 AC IN jack (5)
6~7 FOOT SW jacks
LINE DIGITAL FOOT SW
(ANALOG)
IN OUT COAXIAL OPTICAL
IN IN REC/ PLAY/
PAUSE PAUSE
L
R
Use to input analog signals from other components.
Use to output analog signals to other components.
Connect a digital coaxial cable to input digital signals
from other components.
Connect a digital optical cable to input digital signals
from other components.
Connect the power cord.
Use to connect a SONY FS-A8 foot switch (sold
separately).
6 PLAY/PAUSE jack
Connect an external foot switch (etc.) to be used in
place of the PLAY/PAUSE button.
7 REC/PAUSE jack
Connect an external foot switch (etc.) to be used in
place of the REC PAUSE button.
~
AC IN