Recording With Analog Input (Line Cable Required); Recording For Long Times - Sony MZ-R501 Analog PCLink Operating Instructions Manual

Recording with analog
input (line cable
required)
The sound will sent from the connected
equipment as analog signal but will be
recorded digitally on the disc.
L (white)
Line cable
(RK-G129,
not supplied)*
∗ Use the connecting cords without an
attenuator. To connect to a component
such as a portable CD player having a
stereo mini-jack, use the RK-G136
connecting cord (not supplied).
1
Insert a recordable MD and start
recording.
For recording operations, see
"Recording an MD right away!"
(page 10). To record from a portable
CD player, set the CD player to pause
and then start recording.
16
CD player,
cassette recorder,
etc.
to LINE OUT
R (red)
to LINE IN (OPTICAL)
LINE IN (OPTICAL) jack is for both
digital and analog input
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
Note
A track mark is added at the point where you
press X again to resume recording while
pausing recording; thus the track will be
counted as a new track.
Recording for long
times
Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal
recording time.
MDs recorded in monaural, LP2 or
LP4 mode can be played back only
on MD players or recorders with
monaural, LP2 or LP4 playback
mode.
SELECT
>/.
MENU/ENTER
1
Press MENU/ENTER, press
SELECT >/. repeatedly until
"R-MODE" flashes in the display,
and then press MENU/ENTER again.
N
REC