Service Safety Summary - Tektronix TDS5000B Series Instructions Manual

Option 1r rackmount kit digital phosphor oscilloscopes

Hide thumbs Also See for TDS5000B Series:

Table of Contents

Service Safety Summary

TDS5000B Series (Option 1R) Rackmount Kit

Only qualified personnel should perform service procedures. Read this Service

Safety Summary and the General Safety Summary in the product service manual

or the instruction manual.

Do Not Service Alone. Do not perform internal service or adjustments of this

product unless another person capable of rendering first aid and resuscitation is

present.

To prevent the instrument and rack from falling onto the operator, two or more

installers should install the instrument into the rack cabinet. After completing the

installation procedure, the installers should verify that the instrument and rack

cabinet will not tip forward while the instrument is in the extended position.

Disconnect Power. To avoid electric shock, switch off the instrument power, then

disconnect the power cord from the mains power.

Use Care When Servicing With Power On. Dangerous voltages or currents may

exist in this product. Disconnect power and disconnect test leads before

removing protective panels, soldering, or replacing components.

To avoid electric shock, do not touch exposed connections.

Table of Contents

Do you have a question about the TDS5000B Series and is the answer not in the manual?