Technical Specifications - Bentel Kyo 100 Installation Manual

Expandable multifunction control panel
Table of Contents

Advertisement

Ø PROXI Readers have weather strips, and can be in -
stalled indoors or outdoors (IP34 Protection Class)
and accept SAT Keys and PROXI-cards.
Ø ECLIPSE and PROXI Systems operate without con -
tacts, therefore, are highly resistant to oxidization
and wear.
Ø Alison/32LP is a 32 LED Keypad with built-in pro -
grammable Proximity Reader function.
The operating principles of the MIA-D and ALISON-DV
Keypads are the same, except:
Ø MIA-D Keypads have larger displays, 2 on-board
zones and 3 sets of Function keys for manual activa -
tion of Alarm status;
Ø ALISON-DV Keypads have smaller cases, 1
on-board zone, and an integrated Loudspeaker and
Microphone for use with the K3-VOX.
Ø ALISON-S is identical to ALISON-DV but does have
a microphone or loudspeaker.
K3-VOX The K3-VOX Voice board (accessory item)
can be used for Voice Messages, and Telephone Ac -
cess.
K3-PRT The K3-PRT Printer Interface (accessory
item) can be used for real-time and/or Event Logger
printout.
Power station The Power station has been especially
designed for Security system applications. The tamper
protected box (protected against delinquency and
snatch) can house a battery for power backup during
black-out. This control panel supports up to eight
BXM12-B/30 3A Power Stations and/or BXM12-B/50
5A Power stations.
Management Software The management software
(runs under Windows) provides full Programming, Cus -
tomer Database and real-time Supervisory facilities,
and will allow you to make the fullest use of all the sys -
tem features.
The B-Mod Modem The B-Mod Modem will allow you
to Upload/Download from/to the remote system and
carry out Teleservice operations (remote diagnosis
and maintenance). The B-Mod/RX will allow you to Up -
load/Download from/to the remote system and carry
out Teleservice and Telemonitoring (send/receive
real-time transmissions).
KYO 300-KYO100

Technical Specifications

The following table contains the technical Specifica -
tions of the KYO300.
Voltage
Maximum current
draw
Insulation Class
Power
Supply/Battery
Charger
Maximum Current
available for
Peripherals
Battery
(Brand and Type)
Random Digital
Key/Card Codes
Operating
Temperature
Dimensions
(W x H x D)
Weight
(without battery)
The following chart shows the current draw (I (mA) col-
umn) and size of the accessory components.
Component
KYO300-KYO100 Main Board
MIA-D Keypad
ALISON-DV Keypad
ECLIPSE Reader
PROXI Proximity Reader
ALISON/32LP LED Keypad
M-IN/6 Input Expander
M-OUT/6 Output Expander
Omnia4R 4 Relay Module
K3-VOX + VOX-REM Voice
Board + Microphone
-Loudspeaker Board
K3-AuxCom Auxiliary
Communicator (KYO 300
only)
K3-PRT Printer Interface
BXM12-B/30 Power Station
BXM12-B/50 Power Station
VectorRX Receiver
INTRODUCTION
230 V~ ±10% 50/60 Hz
0.9 A
Class I
13.8 V_ ±1% 5 A (3A for
KYO 100)
3.5 A (1.7A for KYO 100)
12 V - 7 Ah or 12 V - 17 Ah
YUASA
NP 7-12 FR or NP 17-12 FR or
similar
Case Flame Class UL94-V2 or
higher
4.295.000.000
5 ÷ 40 °C
339 x 488 x 108 mm
5.55 Kg
I
Size
(mA)
(WxHxD mm)
250
50
164 x 133 x 44
40
143 x 115 x 38
30
30
78 x 108 x 22
70
142 x 115 x 35
20
20
108 x 101 x 34
120
20
20
40
10
10
50
146 x 290 x 28
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kyo 300

Table of Contents