Tools And Materials For Installation; Estimated Replacement And Filter Change; Pre-Installation Inspection - Reverse Osmosis RF Series User Manual

PLEASE READ CAREFULLY BEFORE PROCEEDING WITH INSTALLATION

TOOLS AND MATERIALS FOR INSTALLATION:

 Variable speed (VS) drill
 Carbide grinding burr
 1/4" (6mm) drill bit
 7/16" (11mm) drill bit
 1/2" (13mm) and 5/8" (16mm) open–end wrenches (or adjustable)
 Phillips screwdriver
 Flashlight or droplight
 Teflon tape
 Protective eyewear (i.e. goggles)
If the above tools are not available, contact your local dealer/distributor for assistance.

ESTIMATED REPLACEMENT AND FILTER CHANGE:

Sediment Prefilters:
Carbon Prefilters:
Carbon Postfilter:
Reverse Osmosis Membrane:
NOTE: The life of the filters and membrane depend on the quality of water supplied to the
reverse osmosis system.
PRE–INSTALLATION INSPECTION:
After opening the shipping container, locate the following items:
1. Reverse osmosis system
2. Membrane and flow restrictor
3. Storage tank
4. Faucet with mounting hardware
5. Installation packet containing: drain saddle, tank ball valve, two mounting screws and
other installation pieces depending on system.
RF – Series User Manual
MKTF – 167-C
6 months – 1 year
6 months – 1 year
6 months – 1 year
1 – 2 years
4 05/17