Sony DVP-C675D Operating Instructions Manual page 36

Changing the Sound
z
You can select "AUDIO" directly
Press AUDIO on the remote. Each time you press the button, the
item changes.
Notes
• Depending on the DVD, you may not be able to change the
languages even if multilingual tracks are recorded on the DVD.
• While playing the CD/VIDEO CD, standard stereo playback
will be resumed when:
– you open or close the disc tray
– the player enters standby mode by pressing @/1 on the
remote
– you turn the power off by pressing ! on the player
• While playing the DVD, the sound may be changed when:
– you open or close the disc tray
– you change the title
36
Displaying the audio information of the
disc
When you select "AUDIO," the channels being played are
displayed on the screen.
For example, in Dolby Digital format, multiple signals
ranging from monaural to 5.1 channel signals can be
recorded on a DVD. Depending on the DVD, the number
of the recorded channels may be different.
1
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
PROGRAM FORMAT
1: ENGLISH
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
* "PCM," "DTS" or "DOLBY DIGITAL" is displayed. In
case of "DOLBY DIGITAL," the channels in the playing
track are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2 . 1
Front component 2
+ Center component 1
** The letters in the program format display mean the
following:
L: Front (left)
R: Front (right)
C: Center (monaural)
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural) – the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital signal.
LFE: LFE (Low Frequency Effect)
PLAY
DVD
Current
audio
format*
C R
Current
LFE playing
program
RS
format**
LFE (Low
Frequency Effect)
component 1