Stopping Playback Automatically (Off Timer); Locking The Controls (Hold) - Sony Walkman D-NE500 Operating Instructions Manual

Stopping playback
automatically
You can set the CD player to stop playback
automatically within a range of 1 to 99
minutes by one minute. While the timer
function is working, " " appears at about 5-
second intervals.*
* When Screen 1, 2 or 3 is displayed (Audio
CD: when Screen 1 or 2 is displayed) (page
16)
1
Press DISPLAY/MENU until the
MENU screen appears. Turn the
jog dial to select "OPTION," then
press DISPLAY/MENU.
2
Turn the jog dial to select "TIMER,"
then press DISPLAY/MENU to
enter the selection.
3
Turn the jog dial to select "10
min*," then press DISPLAY/MENU.
* Default setting. If you have changed the
setting, the length of time already set
appears.
4
Turn the jog dial to select the
length of time you want to set from
"01 min" to "99 min," then press
DISPLAY/MENU to enter the
selection.
To return to the previous screen
Press – on the CD player.
To cancel the setting operation
Push the 5-way control key toward x.
To check the length of time before the
CD player stops playback
During play, perform steps 1 - 3.
To cancel the OFF TIMER function
Perform steps 1 - 3, changing the OFF
TIMER setting to "OFF."
(OFF TIMER)
Locking the controls
(HOLD)
You can lock the controls on your CD player
to prevent accidental button presses.
If you press any button when the HOLD
function is activated, the OPR lamp flashes
and "HOLD" also flashes in the display .
Slide HOLD in the direction of the
arrow.
You can use the HOLD function with both
the CD player and the remote control. You
can still operate your CD player using the
remote control when HOLD on the remote
control is set to off.
To unlock the controls
Slide HOLD in the direction opposite to that
of the arrow.
25