Connecting A Power Source; Using The Rechargeable Batteries - Sony D-E990 Operating Instructions Manual

B Connecting a power source
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see "Playing a CD")
• LR6 (size AA) alkaline batteries (battery
case)
For the battery life and charging time of the
rechargeable batteries, see "Specifications."
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NH-14WM
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid.
Put the end of the
ribbon inside.
3
Connect the AC power adaptor to
the EXT BATT/DC IN 4.5 V jack of
your CD player and an AC outlet,
then press x/CHG to start
charging.
If the AC power adaptor does not fit the
AC outlet, use the AC plug adaptor.
x/CHG button
to EXT BATT/
DC IN 4.5 V
AC power adaptor
The CD player charges the batteries. The
indicator sections of
of the remote control light up in
succession and the CHG/HOLD lamp
lights up.
When the batteries are completely
charged, all indications in the display
disappear and the CHG/HOLD lamp
goes off.
If you press x/CHG after the charge has
already been completed, the
indicator flashes and "Full" appears in
the display, and the CHG/HOLD lamp
flashes.
4
Disconnect the AC power adaptor.
CHG/HOLD lamp
to an AC outlet
in the display
(Continued)
17