Download Print this page

Connecting/Disconnecting - Panasonic CF-VEB522 Operating Instructions Manual

Port replicator for cf-52 series personal computers
Hide thumbs

Advertisement

Connecting/Disconnecting

CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or in
the sleep (Windows Vista), standby (Windows XP) or hibernation mode.
Connecting
1
Power off the computer, and disconnect all cables
from the computer.
2
Connect the plug of the AC adaptor that came with
the computer to the DC-IN jack of the port replicator
E
and plug the other end into an AC outlet.
CAUTION
Refer to the "Operating Instructions" accompanying computer for informa-
tion on proper handling of the AC adaptor and AC cord.
3
Slide the computer onto the port replicator, align the
back of the computer with the back of the port
replicator, and then slowly lower the computer to con-
nect the expansion bus connector.
CAUTION
Do not connect the computer to a port replicator while the computer is con-
nected to the AC adaptor or other cables.
Do not attempt to make connections if there is any object between the com-
puter and the port replicator. Doing so could damage the computer and the
port replicator.
8

Advertisement

loading