ActionTec Wireless DSL Gateway GT701WG User Manual page 103

Actiontec 54 Mbps Wireless DSL Gateway User Manual
7. The "Local Area Connection Properties" window appears. Click General.
8. In the "Components checked are used by this connection" list box, double-
click Internet Protocol (
9. The "Internet Protocol (
10. In the General tab, make sure the circle next to "Use the following
" is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
11. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
).
TCP/IP
) Properties" window appears.
TCP/IP
IP
192.168.0.2
100
Address" text box:
Address
IP