10 Operating Instructions and Installation
10-3 New Features
- Improved Response Time by Adopting RTA: 12ms (Based on "Gray to Gray")
- Support Magic Color: Demo, Full, Intelligent
- Magic Zone: Brightness adjustment for local areas
- Magic Bright: 6 steps used
Text, Internet, Sports, Game, Movie and Custom
- Magic Tune 3.6 and Pivot software installed
: An upgraded version that compensates for the old Magic Tune 2.0 and adds some new features for the
user's convenience
- Auto Pivot: When the monitor is rotated in 90 or 180 degrees, the display LED and OSD also are automati
cally rotated accordingly. This can be performed only when Magic Tune 3.6 and the Pivot software are run
ning.
10-4 Installation Instructions
(The configuration at the back of the monitor may vary from product to product.)
1.Power port
Connect the DC adapter for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2.DVI port
Connect the DVI cable to the DVI port on the back of your monitor.
3.D-sub 15-pin port
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
10-2