Setting A Plaque; Plaque; Setting The Character Color; Color Sel - Sony CDX-M3DI Operating Instructions (XT-XM1) Operating Instructions Manual

Setting a Plaque

— Plaque

If characters fade into a similar colored
background image, the plaque setting will make
the characters more readable.
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"Plaque."
Each time you press < or ,, the item
changes as follows:
AutoClear y BlendLevel y
Plaque y Color Sel y
AutoImage y AutoClear
4
Press (ENTER).
5
Press (ENTER).
6
Press M or m repeatedly to select
"ON."
7
Press (ENTER).
8
Press (GRAPHIC).
The display returns to the normal display.
Note
If "Plaque" is set to "ON," "BlendLevel" you adjusted
has no effect.
22

Setting the character color

— Color Sel

You can select one of 7 color settings for the
character display. Besides, you can adjust and
store the desired color in the unit.
Selecting the character color
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (GRAPHIC).
3
Press < or , repeatedly to select
"Color Sel."
Each time you press < or ,, the item
changes as follows:
AutoClear y BlendLevel y
Plaque y Color Sel y
AutoImage y AutoClear
4
Press (ENTER).
5
Press (ENTER).
6
Press M or m repeatedly to select the
desired character color.
Each time you press M or m, the character
color changes.
y
Blue White y Green y Pink
y Yellow y Purple y Black y
y
Custom Blue
7
Press (ENTER).
8
Press (GRAPHIC).
The display returns to the normal display.