Siemens OpenAir GBB161.1U Technical Instructions page 4

Technical Instructions
Document Number 155-176P25
June 22, 2015
Accessories
Page 4
NOTE:
Neither the control signal adjustments nor the auxiliary switches can be
added in the field. Order the product numbers that include these options.
Figure 1. Floor Mount Kit.
Figure 2. Frame Mount Kit.
Figure 3. Crank Arm Kit.
Figure 4. Crank Arm Kit with Mounting
Bracket.
GBB/GIB Series Non-spring Return, 24 Vac, Modulating Control
ASK71.1U: Kit allows foot mounting of
the OpenAir actuators. Kit should be used
for in-the-air stream applications, and
anywhere a foot-mounted actuator can be
mounted. Kit contains:
• Crank arm that changes the angular
rotation into a linear stroke
• Support bearing ring to minimize
side loading on the actuator's output
bearing
• Mounting bracket
• Required mounting fasteners
ASK71.2U: Kit allows mounting of
OpenAir actuators directly to a damper
frame. Kit should be used with louvers
and vents and in applications where use
of the floor mount kit is not possible.
Kit contains:
• Crank arm that changes the angular
rotation into a linear stroke
• Support bearing ring to minimize
side loading on the actuator's output
bearing
• Mounting bracket
• Required mounting fasteners
ASK71.3: Kit allows a direct-coupled
actuator to provide an auxiliary linear
drive. Crank arm kit can be used to
simultaneously drive a set of opposing or
adjacent dampers with a single actuator.
Kit contains:
• Crank arm that attaches to the
splined hub of the shaft adapter
• Other required mounting fasteners
ASK71.4: Kit allows economical mounting
of OpenAir actuators to a variety of
surfaces. Kit should be used in
applications where the actuator can be
rigidly surface mounted and a linear
stroke output is required. Kit contains:
• Crank arm that attaches to the
splined hub of the shaft adapter
• Mounting bracket
• Required mounting fasteners
Siemens Industry, Inc.