Specifications; Ordering Information - Honeywell Modutrol IV Series 61 Manual

SERIES 61 AND SERIES 62 MODUTROL IV™ MOTORS

SPECIFICATIONS

Models: TRADELINE models are selected and packaged to
provide ease of stocking, ease of handling and maximum
replacement value. TRADELINE model specifications are the
same as those of standard models unless specified otherwise.
TRADELINE models have auxiliary switch cams.
M Motor
61 Floating Control
62 Floating Control with feedback
6
7
8
9
M 61 8
a
Electrically normally closed. Shaft rotates clockwise (viewed from the power end) with increase in control signal. Motor drives to
normally closed position when powered with control wiring not connected.
b
Electrically normally open. Shaft rotates counterclockwise (viewed from the power end) with increase in control signal. Motor
drives to normally open position when powered with control wiring not connected.

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Relations
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
63-2188—4
Table 1. Modutrol IV Order Number Guide.
— 35 lb-in. Non-Spring Return
25 lb-in. Spring Return 75 lb-in. Non-Spring Return
60 lb-in. Spring Return 150 lb-in. Non-Spring Return
— 300 lb-in. Non-Spring Return
1 Single-ended shaft
2
3
4 Dual-ended shaft
5
6
A 0 Auxiliary Switches
B 1 Auxiliary Switch
C 2 Auxiliary Switches
D 0 Auxiliary Switch
E 1 Auxiliary Switch
F 2 Auxiliary Switches
G 0 Auxiliary Switch
H 1 Auxiliary Switch
J 2 Auxiliary Switches
K 0 Auxiliary Switch
L 1 Auxiliary Switch
M 2 Auxiliary Switches
4 A XXXX
2
NOTE: Auxiliary switches can only be added to motors that
include auxiliary switch cams. (These cams cannot
be field-added.)
Modutrol IV Order Number Guide: See Table 1.
Dimensions: See Fig. 1.
Non-Spring Return
Normally Closed
Normally Open
Non-Spring Return
Normally Closed
Normally Open
Fixed Stroke
Adjustable Stroke
Fixed Stroke
Adjustable Stroke
See Catalog for Complete O.S. Number
a
Spring Return
b
Spring Return
a
Spring Return
b
Spring Return
a
Normally Closed
b
Normally Open