Adding A Sensor - Toshiba Symbio User Manual

* The screen appearance is subject to change without notice.
Note
Sort By Type
Tap
Sort By Zone
Tap
The sensors below are available. Visit
Turning on/off electric appliances
You can turn on/off the electric appliances such as a lamp.
Increasing/decreasing levels
You can dim or brighten a room lamp, for example.
Binary sensor
You can see whether the door is open or closed, whether something moves within the camera range
of Symbio, or whether there has been water leakage. In addition, this sensor detects smoke or
carbon monoxide (CO).
Alarm
This sensor sounds an alarm.
Detecting temperature/humidity/brightness
You can see the room temperature, humidity, or brightness.
Estimation
You can see an estimation of power consumption.
Locking/unlocking a door
You can lock/unlock the door.
Thermostat
You can change the room temperature.

Adding a sensor

Follow the steps below to add a sensor.
1. Tap Sensors
to sort sensors categorized by a sensor type.
to sort sensors categorized by a place where sensors are located.
http://www.TSB-SmartHome.com
on the Home screen.
for the latest information.