Table of Contents
Advertisement
USB terminal
2.
Used on the manufacturing process and after-sales service.
3.
Power input
Connect the supplied AC adapter.
Bottom
Reset button
1.
Press and hold the button using a pen tip or like for 5 seconds or more.
Pressing and holding the button makes the all Volume indicators and Microphone mute
indicators starts blinking. After blinking stops, release button. After that, the settings have
been reverted back to the default.
If this controller is the primary controller of Z-Wave for your network, resetting it will result in
the nodes in your network being orphaned and it will be necessary after the reset to exclude
and re-include all of the nodes in the network.
If this controller is being used as a secondary controller of Z-Wave in the network, use this
procedure to reset this controller only in the event that the network primary controller is
missing or otherwise inoperable.
Accessory
AC adapter
Advertisement
Table of Contents
