Accessing The Web Interface - VADDIO OneLINK HDMI Integrator's Complete Manual

Integrator's Complete Guide to the OneLINK HDMI Camera Extension

Accessing the Web Interface

To get the IP address:
Ensure that the OneLINK device is connected to the network, or directly to a PC, and read the IP address
from the display on the front.
The OneLINK device will use the default address of 169.254.10.1 if no DHCP server is available. In this
situation, you will need to connect a computer to the OneLINK device's network port and configure network
settings. Depending on the computer, you may need a crossover cable.
To access the web interface:
Enter the IP address or hostname in your browser's address bar. If you use the hostname, you may need to
enter http:// as a prefix to keep the browser from treating it as a search query.
Either a login dialog or the Help page opens. The username admin and the default password is password.
After you log in, the System page opens.
Note
For best security, Vaddio strongly recommends changing the default password. Using default passwords
leaves the product vulnerable to tampering. See Managing Access and Passwords.
47