Checking Included Items - Canon PIXMA TS5100 Series Getting Started

1. Checking Included Items

□ Power cord
□ Setup CD-ROM for
Windows PC
2. Removing Packing
Materials / Turning on
Printer
1
Remove the packing materials )such as orange
tape and protective film on the LCD( from outside
the printer.
2
Hook the hollows on the both sides of the printer
with your fingers and open the scanning unit /
cover.
3
Remove the orange tape and the protective
material and discard them.
4
Close the scanning unit / cover.
5
Connect the power cord diagonally from the back.
Back
Do not connect any cables except the power cord
yet.
□ FINE cartridge
□ Safety and Important Information
□ Getting Started )this manual(
6
Lift the operation panel and press the ON button.
7
Use the { or } button to select a language, and
then press the OK button.
8
Press the OK button.
For details about information that is sent to Canon,
refer to "Sending Data To Canon" in Safety and
Important Information.
9
Use the { or } button to select Agree or Do not
agree, and then press the OK button.
10
Read the messages and press the OK button.
1