McAfee WebShield e500 Installation Manual page 68

Installation Guide — English
To restore or upgrade the appliance's software:
1. Connect a keyboard to the appliance's keyboard port (colored purple,
2. Connect a monitor to the appliance's monitor port (see
3. Turn on the appliance, if it is off.
4. Insert the WebShield e500 Appliance recovery CD or upgrade CD into
5. Push the reset button on the control panel on the front of the unit
6. Read the license agreement carefully, then enter
ENG - 58
see on page 16).
F
the appliance's CD-ROM drive (see
depends on whether you are restoring or upgrading the software.
(see on page 15).
C
The appliance performs its startup sequence. It then reads the CD and
displays a license agreement.
NOTE: The following steps are correct for the WebShield e500
Appliance recovery CD. However, if the screen prompts are
different for your CD, follow the screen prompts.
If you do not accept the license agreement — entering
cannot use the software on the CD.
The following options are presented:
1: Perform a full installation removes all data from the appliance's
hard disk drives and reinstalls the software.
2: Install software on this CD reinstalls the software while
attempting to preserve the areas containing the following items:
• Configuration data
• Log data
• Quarantined e-mail messages
• Deferred e-mail messages
If the restoration process cannot preserve these areas, it re-creates
them.
3: Perform a software upgrade performs the appropriate software
upgrades (if available) that are contained on the CD.
on page 14). The CD that you use
B
to accept it.
Y
N
McAfee WebShield e500 Appliance version 2.5
on page 16).
G
to reject it — you