McAfee WebShield e500 Installation Manual page 45

7. Type the user name and password, then click OK.
8. In the Appliance name text box, type a unique host name for the
9. In the DNS server text box, type the IP address of the local DNS server.
10. In the Domain name text box, type the domain or subdomain in which
11. In the DNS server text box, type the IP address of the local DNS server
12. If the appliance communicates with the network through a default
13. To use the appliance in transparency mode, select Enable
Installation Guide
The appliance's user interface appears, showing the System
Configuration page.
If you have configured the appliance before, the System Status page
appears with a navigation bar on the left. To display the System
Configuration page, select System Configuration in the navigation bar.
For details on the user interface, see
For details on configuring a particular page, view the Help topic for that
page by clicking the Help
NOTE: If you have a configuration file taken from an earlier version
of the appliance, you can use the Restore Configuration panel to
restore those settings to the appliance; see
on page 56.
appliance of no more than 15 characters (see
page 18).
the appliance is located, such as myorg.com (see
(see "Network addresses" on page
gateway or router (firewall), type the gateway or router's IP address in
the Default gateway text box (see
There are circumstances where the appliance might need to use more
than one gateway or router to communicate with the entire network.
If this is required, you can specify these additional gateways and routers
as static routes; see Step 22 on page
Transparency. Otherwise, leave the checkbox clear to use the appliance
in proxy mode (see "Proxy or transparency mode?" on page
Installation Guide — English
"Using the appliance" on page
button.
"Restoring your settings"
"Appliance host name" on
"Domain" on page
19).
"Network addresses" on page
38.
53.
18).
19).
22).
ENG - 35