Installing The Appliance - McAfee WebShield e500 Installation Manual

Installation Guide — English

Installing the appliance

When you have gathered the required configuration
information (see
appliance in the required location, making the
necessary connections (step 2).
This chapter describes the installation steps.
We recommend that you read them before
performing the actions, to ensure that you know what
is required.
See
Step 3 — configuring the appliance's network
settings — is described on
For details on the appliance's ports and connectors,
see
To install the WebShield e500 Appliance:
1. Read the safety warnings in
2. Remove the WebShield e500 Appliance from
3. If you are going to install the appliance in a
ENG - 28
page 18), you are ready to install the
page 11 for a list of additional required items.
page 14.
information" on page 3
follow them at all times.
any protective packaging and place it on a flat
surface.
specific place, such as a 19" (inch) rack, perform
the following steps ensuring that you follow all
safety warnings; see
information" on page
a. Prepare the intended location.
You can use the mounting kit to install the WebShield e500
Appliance into a 19" (inch) rack. Follow the instructions on
(at the front of this guide).
Ensure that you allow for adequate ventilation and access to the
appliance's ports and connectors when you put it in place.
b. Put the appliance in its intended location.
Ensure that the appliance is secured firmly in place, so that it cannot
fall.
page 32.
"Power and safety
and ensure that you
"Power and safety
3:
McAfee WebShield e500 Appliance version 2.5
1
Gather the
configuration
information
2
Install the
appliance
3
Configure the
appliance's
network settings
4
Configure the
appliance's
protocol settings
5
Back up the
appliance's
settings
page viii