McAfee WebShield e500 Installation Manual page 48

Installation Guide — English
20. Click Outside Networks to display the Outside Networks panel.
21. Use this panel to specify the domains or IP subnets for the external
22. If you need to specify some static routes for various parts of your
23. If you are using the appliance in transparency mode and want to use
24. Click Time and Password Settings to display the Time and Password
25. Change the Time zone, Date and Time values to reflect the current date
ENG - 38
This panel shows the networks configured as being external to the
appliance. By default, the appliance uses the * wildcard symbol in its
Outside Networks list to identify that all networks (other than those
specified in the Inside Networks list) are external networks.
IMPORTANT: We recommend that you keep the * domain entry in
your external networks because it ensures that the appliance can
proxy traffic for the Internet.
Ensure that you include the IP address of your firewall.
networks outside your organization (outside the firewall). You can
specify as many networks as you want (see
21).
To add a network, click Add, then specify either its domain or its IP
address and subnet mask in the Add dialog box that appears. Click OK
to add it to the Outside Networks list.
network so that the appliance know how to reach them (see
and dynamic routing" on page
routes in the Static Routes panel.
dynamic routing, click Dynamic Routes then select Enable Dynamic
Routing.
Dynamic routing is a system that allows your network equipment
(including the appliance) to listen for the routing information that is
broadcasted by the routers on your network. Remember that the
appliance only supports the RIP (Routing Information Protocol) and
OSPF (Open Shortest Path First) routing protocols.
Settings panel.
and time, then click Set now. The time is in 24-hour format.
The appliance changes its date and time. These values are used when
time-stamping the traffic that passes through the appliance, and when
logging and alerting.
"External networks" on page
23), click Static Routes and specify those
McAfee WebShield e500 Appliance version 2.5
"Static routes