Table of Contents
Advertisement
Configuring Your ADSL Router
Verifying Your Local Network Connection with the Device
To see if this ADSL Router is
visible on the local network, go
to Start / Run. In the Run dialog
box, type "ping 192.168.1.254"
then press OK.
A command prompt window will
pop out.
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
"Request timed out" in the
command prompt window. You
may need to check your set up.
To configure this device, you must have IE 5.0 / Netscape 4.5 or
above installed
If your ping is
Billion VoIP/(802.11g) ADSL2+ Router
9
Advertisement
Table of Contents
