Advertisement
Note: The following are the conditions which can not be
free warranty service.
A. Term of the warranty expired;
B. The emergence of breakage, due to improper care
and device settings, and as a result of using Mi YunBike
C1 is not in accordance with instructions;
C. Failure as a result of misuse, improper care or
accident;
D. Damage caused by self repair, alteration,
dismantling, then the device does not meet its original
state, or as a result of improper technical analysis and
determination of fault;
E. Improper use of original charger, which caused
After-sales servicing is carried out according to the law on «The rights of consumers of China» and «Law on product
quality of China». In warranty service includes:
During the warranty period you have the right to repair, modify or return.
For repair, replacement or return of goods, you must have a receipt.
First, officials from the customer must examine the goods, identify existing problems and confirm its compliance with
the terms of the warranty service.
Power button
Turn off: under any circumstances, hold down
the power button for 2 seconds to eliminate the
vehicle;
Charging: When the battery charge indicators are
lit red when the battery is fully charged, green
lights are flashing;
Determining the level of charge the device while it
is charging:
Free warranty Terms
problems of Mi YunBike C1 charging;
F. You have not a valid document (current invoice) or a
mismatch of data from the device;
G. Malfunction through smoke, pharmaceuticals, chemicals,
corrosion, water ingress, etc.;
H. Malfunction of the electronic system bike through
dampness, rain or snow;
I. Damage incurred in a force majeure (including but not
limited to - lightning, fire or flood);
J. Natural breakdown / failure of parts that easily wear parts
and consumables (fuses, light bulbs, brake pads, brake
cables, spokes, tires, pedals, rubber plugs, plastic parts);
K. Maintenance device in unauthorized service centers;
L. After purchase you do not like the color, size vehicle.
Warranty
Enable / disable the battery, rear lights, charging
System:
1. Press and hold the power button for more than 2 seconds, then turns
indicator will light up 4. Every indicator points to a level of charge;
75-100% 4 LED1- lits;
50-75%, LED1 is off, LED2-4 lit;
25-50%, LED1, LED2 are off, LED3-4 lit;
0-25%, LED1, LED2, LED3 are off, LED4 lights;
2. One short press the power button - continuous flicker of 4 indicators;
Press power button - 4 simultaneous flashing indicators;
Press power button - all 4 lights on constantly;
Press power button - repeat of three specified modes listed above
indicators;
> 98%, lamp 4 lits;
75-98%, LED1 flickers, the other 3 indicator lit continuously;
50-75%, LED1 is off, LED2 blinking, LED3, LED4 is constantly lit;
20-50%, LED1, LED2 are off, LED3 flickers, LED4 is lit
constantly;
0-20%, LED1, LED2, LED3 are off, LED4 flickers;
Advertisement
