Labelling A Cd; Disc Memo - Sony CDX-555RF Operating Instructions (English/Español) Operating Instructions Manual

Labelling a CD

(CD changer with custom file function)
You can label each disc with a personalised
label. Use the wireless remote to enter and
erase the characters.
1
Press (DSPL/-EDIT) for two seconds until
the first character flashes.
2
Input the characters.
1 Press NAME
desired characters.
(A t B t C t ... Z t 0 t 1 t 2 t
... 9 t + t – t * t / t \ t > t <
t . t _ t ...)
Press NAME
characters. If you press NAME
characters will appear in reverse order.
If you wish to put a blank space after a
character, select "_" (under-bar).
An alternative method to erase a title
You can erase a title by selecting eight "_"s
(under-bar).
2 Press (ENTER/-DELETE) after locating
the desired character.
The next character flashes.
3 Repeat steps 1 and 2 to enter the
entire title. Up to eight characters can
be entered per disc.
3
To return to the normal CD playback
mode, press (DSPL/-EDIT) for two
seconds.
8

— Disc Memo

or to select the
to display the available
, the
Displaying the disc memo
Press (DSPL-SCRL) during CD playback.
Each time you press (DSPL-SCRL) during CD
playback, the display changes as follows:
B Elapsed playback time
Track name b
Using on the wireless remote
Press (DSPL/-EDIT) to change the display.
Notes
• If a disc has not been assigned a personalised
label, "********" or "NO NAME" will appear on
the display.
• The CD TEXT information appears only when a
CD TEXT disc is played back.
• If you use personalised labels, they will always
take priority over the original CD TEXT
information when such information is displayed.
• "**WAIT**" appears in the display while the
system is reading the data.
• The system shows the CD TEXT information with
alphabetic characters, numbers, and symbols.
(The lowercase characters contained in the CD
TEXT disc are automatically converted to
uppercase.)
Erasing the disc memo
1
Play the CD and press (DSPL/-EDIT) for
two seconds.
2
Press (ENTER/-DELETE) for two seconds
until DISC NAME indication flashes.
3
Press NAME or
that you wish to erase.
4
Press (ENTER/-DELETE) to make DISC
NAME indication and the disc name
flash.
5
Press (ENTER/-DELETE) again.
The title is erased.
Repeat steps 2 through 4 if necessary.
6
Press (DSPL/-EDIT) for two seconds.
The unit returns to the normal CD playback
mode.
B Disc name
to select the title