Maintenance; Dismounting The Unit - Sony CDX-3000 Operating Instructions Manual

Maintenance

Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
EN
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean the connectors
with a cotton swab dipped in alcohol. Do not
apply too much force. Otherwise, the
connectors may be damaged.
Back of the front panel
10
Actual total number:
Fuse (15 A)
Main unit

Dismounting the Unit

1
2
3
4
E
Sony CDX-3000 ( ,F,S,P,H,W) 3-856-544-21(1)
0
Release key
(supplied)