Siemens SCALANCE M-800 Getting Started page 33

Configuring ADSL
1. Click "Interfaces" > "DSL" in the navigation area
2. Enable the DSL interface.
3. Disable PPPoE passthrough to set up the access data for the SCALANCE M81x. The
connected devices can use this DSL connection.
If "Enable PPPoE Passthrough" is selected, the access data cannot be configured. In this
case the SCALANCE M81x is used as a modem. Each individual connected device
sends its access data to the SCALANCE M81x and establishes its own Internet
connection.
4. Enter the user name and the password for the ADSL access.
5. Enter the settings for VCI / VPI. You will receive the settings from your DSL provider.
6. In "Encapsulation" select the required protocol.
7. Click on "Set Values".
Getting Started, 01/2019, C79000-G8976-C337-07
1.9 Additional configuration steps with the SCALANCE M87x and SCALANCE M81x
Connecting SCALANCE M-800 to WAN
33