Connecting SCALANCE M-800 to WAN
1.5 Starting Web Based Management
6. Confirm the dialogs with "OK" and close the Control Panel.
7. Enter the IP address "192.168.1.1" in the address box of the Internet browser.
Access via HTTPS is enabled as default. If you access the device via HTTP, the address
is automatically redirected to HTTPS.
A message relating to the security certificate appears. Acknowledge this message and
continue loading the page.
Note
Information on the security certificate
Because the device can only be administered using encrypted access, it is delivered with
a self-signed certificate. If certificates with signatures that the operating system does not
know are used, a security message is displayed. You can display the certificate.
22
Getting Started, 01/2019, C79000-G8976-C337-07