12.2. Adjusting of Set Values of the Unit
From the room control unit of the "URTP" device, two separate set adjustments can be possible as Comfort
and Eco Modes. These set points are presented below.
Comfort Heating Room Temperature Set Value
Comfort Cooling Room Temperature Set Value
Eco Heating Room Temperature Set Value
Eco Cooling Room Temperature Set Value
There are two methods to adjust the room temperature set values. For the first method, press
home screen to enter the menu containing the set values, enter the set values to be changed by pressing its
key, change it by pressing the ( - ) or ( + ) key and confirm the new set value by pressing the
the second method, while the device is operating, press the ( - ) or ( + ) key to change the room temperature
set values belonging to the current mode.
12.3. Room Control Panel Lock of the Unit
The room control unit has a screen lock to prevent unauthorized people to make changes to the operation
modes or setting points of the room control unit due to the place it will be located. The screen lock can be
activated by pressing the
screen lock can be deactivated by pressing the
12.4. Alarm Management of Room Control Unit
If there is an alarm situation on the "URTP" device, the
middle to the left) for 5 seconds to open the screen containing the active alarms. If the factor causing the
alarm has been eliminated, press the
Below is the table demonstrating the descriptions of the relevant alarm codes.
key for 5 seconds, and none of the keys will function from now on. The
key for 5 seconds again.
key (in the bottom to the right) for 5 seconds to reset the alarm.
60
icon will be active. Press the
key on the
key. For
key (in the