UNTES URTP055 Instructions For Installation, Commisioning, Maintenance And Use page 58

The room control unit have 8 keys on it. These keys are demonstrated below by numbering.
You may see the table explaining functions of buttons below.
Button
Image
Number
1
2
3
4 -
5 +
6
7
8
It is used to switch on and off the device and activate or deactivate time program.
It displays available alarms when pressed for 5 second on the main screen.
It displays date-hour settings and automatic operation program when pressed twice on the main screen.
It locks or unlocks the screen when pressed on for 5 seconds on the main screen.
It takes you back to the main screen when pressed once on other menus.
It is the button for returning back between menus and decreasing set values.
Room temperature settings are displayed when pressed on the main screen when the device is on.
It is the button for returning back between menus and increasing set values.
Room temperature settings are displayed when pressed on the main screen when the device is on.
The screen for temperature set value opens up when pressed once on the main screen.
It is the enter-confirm button and it also functions as reset button for alarms when pressed on for 5 seconds
on the alarm menu.
It activates dehumidification mode manually when pressed on for 5 seconds on the main screen.
If the manual dehumidification mode is active on the main screen, it deactivates the dehumidification mode
when pressed on for 5 seconds.
It switches between heating and cooling modes when pressed on for 5 seconds on the main screen.
It switches between comfort, economy and protection modes when pressed for once on the main screen.
Function
58