Advertisement
Quick Links
Lites
PROFILE LED WHITE
Owner's and service manual
Read this manual totally and carefully follow all the instructions contained. File this manual for
future use
It is essential to read all the information contained to ensure installation, service and full
operation of the HPLED
All operations must be accomplished, handled and carried out by qualified personnel only
NOT COMPLYNIG WITH GIVEN NOTICE WILL VOID WARRANTY AND WILL FREE THE
MANUFACTURER OF ANY SORT OF RESPONSABILITY AND LIABILITY.
www.litessrl.com
Advertisement
Related Manuals for Lites PROFILE LED WHITE
Summary of Contents for Lites PROFILE LED WHITE
- Page 1 Lites PROFILE LED WHITE Owner's and service manual Read this manual totally and carefully follow all the instructions contained. File this manual for future use It is essential to read all the information contained to ensure installation, service and full...
- Page 2 Unpack the carton and gently remove Lites Profile from the box. Ensure Lites Profile received is integer from origin in all its components. In the event the Lites Profile shows any damage, do not use it and contact immediately your transporter as well as your seller.
-
Page 3: Technical Specifications
Technical specifications Power Supply 100-240 V~ 50/60Hz Maximum power consumption 170W (Bridgelux BXRC) cos Ø 0,98 Stand-by power consumption Minimum ambient temperature -10°C Maximum ambient temperature 35°C LED Colour Temperature: 2700°k, 3000°K, 4000°K,,5600°K (to specify when ordering) LED CRI Colour frame dimensions: 160x160 mm Aluminium die-caste body to maximize heat dissipation LED Life... -
Page 4: Connection To Mains
Lites Profile is delivered with a robust yoke which hosts 3 x 12 mm mounting holes. The use of an adequate G-clamp to sustain at least twice the weight of the Lites Profile (Lites Profile weighs 7,5 kg) and/or M10 screw is mandatory. The use of safety chain(s) to sustain twice the weight of the Lites Profile is also mandatory, the safety chain adds more protections to users and third-parties. - Page 5 Signal control connection Lites Profile can be operated via either DMX512A and or RDM ready Protocols. For Daisy chain DMX line use a- 2 lead wire plus shield. Red led on when DMX Input is available. DMX off line when led is off...
- Page 6 Gel frame Lites Profile delvered with a standard 160x160mm colour frame. The LED source used on Lites Profile allows the use of colour filters that cannot be used with high wattage tungstene lamps which would impair colour filters. Ensure that...
- Page 7 Shows HPLed life SoFt Shows Software version DMX Operating Modes (Mode) Lites Profile provides different DMX operating modes ensuring the ideal use of the DMX universe Shutter/strobo, 8/16 bit dimmer, fan speed and LED frequence are adustable 1ch mode Channel...
- Page 8 Do not touch nor clean the LED nor the yellow area around it with solvent Device disposal information At the end of its life, Lites Profile must be disposed to an appropriate electrical and electronic equipment waste collection centre. Eco-friendly disposal, helps to avoid possible negative impact on the environment and human health and promotes the reuse and/or recycling of the materials making up the product.