Advertisement
Quick Links
Lites
PROFILE LED WHITE
Owner's and Service Manual
Read this manual carefully, and follow all instructions contained herein. File this manual for future
reference.
It is essential to read and follow guidelines and other information contained in this manual to
ensure proper installation, service and full operation of the HPLED.
All operations must be performed only by qualified personnel.
NON-COMPLIANCE WITH GUIDELINES PROVIDED WILL VOID WARRANTY AND DISCHARGE THE
MANUFACTURER FROM ANY RESPONSIBILITY.
www.litessrl.com
Advertisement
Related Manuals for Lites PROFILE LED WHITE
Summary of Contents for Lites PROFILE LED WHITE
- Page 1 Lites PROFILE LED WHITE Owner’s and Service Manual Read this manual carefully, and follow all instructions contained herein. File this manual for future reference. It is essential to read and follow guidelines and other information contained in this manual to ensure proper installation, service and full operation of the HPLED.
- Page 2 – ensuring the best conditions and performance of the Lites Profile. Never touch the yellow LED core in any way, nor use solvents - as this can damage the LED beyond repair. Protection shields (lenses) - if worn out - must be replaced with new ones.
-
Page 3: Technical Specifications
Technical specifications Power Supply 100-240 V~ 50/60Hz Maximum power consumption 170W (Bridgelux BXRC) Cos Ø 0,98 Stand-by power consumption Minimum ambient temperature -10°C Maximum ambient temperature 35°C LED Colour Temperature: 2700°k, 3000°K, 4000°K,5600°K (to specify when ordering) LED CRI Colour frame dimensions: 160x160 mm Aluminium die-caste body to maximize heat dissipation LED Life... - Page 4 Lites Profile is delivered with a robust yoke with 3 x 12mm mounting holes. The use of an adequate C-clamp to sustain at least twice the weight of the Lites Profile (Lites Profile weighs 7,5 kg) and/or M10 screw is mandatory. The use of safety chain(s) to sustain twice the weight of the Lites Profile is also mandatory;...
- Page 5 Signal control connection Lites Profile can be operated via either DMX512A and/or RDM ready Protocols. For daisy chain DMX line, use a 2-lead wire plus shield. Red LED dot is on when DMX Input is available. DMX off line when LED dot is off.
- Page 6 Gel frame Lites Profile is delivered with a standard 160x160mm colour frame. The LED source used on Lites Profile allows the use of colour filters that cannot be used with high wattage tungsten lamps that would impair colour filters. Ensure that accessories installed on the Lites Profile are securely fitted in the gates and secured by the spring lock provided (see figure).
- Page 7 Shows HPLED life SoFt Shows Software version DMX Operating Modes (Mode) Lites Profile provides different DMX operating modes ensuring the ideal use of the DMX universe Shutter/strobo, 8/16 bit dimmer, fan speed and LED frequency are adjustable. 1ch mode Channel...
- Page 8 Device disposal information At the end of its life, Lites Profile must be disposed of at an appropriate electrical/ electronic equipment waste collection centre. Eco-friendly disposal helps avoid possible negative impact on the environment and human health, and promotes the re-use and/or recycling of materials making up the product.