Ronbow SIGNATURE Series Installation And Care Manual page 5

UNITY
Vanity
Model :
E042031
E042047
INSTALLING THE SINKTOP
Step 1:
Clean the top surface of the vanity
with a clean damp cloth.
Apply a thin bead of silicone around
the top surface.
See Figure 4.
Step 2:
Place the sinktop on the vanity.
Clean any excess silicone immediately.
Follow the directions on the silicone to
allow for ample drying time.
Step 3:
To install the plumbing the drawers
would need to be removed.
Refer to page 5 to remove / re-install
the drawer.
INSTALLATION SHEET
Figure 4.
ronbow.eu | ronbow.com
Designed By: KURZ KURZ DESIGN | GERMANY
4
161020