Ronbow SIGNATURE Series Installation And Care Manual page 4

UNITY
Vanity
Model :
E042031
E042047
INSTALLATION - FREE-STANDING
Step 1:
Determine the ideal location of your
new vanity.
NOTE: the location needs at least two
studs. Front notch the studs and install
the 2x6 horizontal beam 30-3/4" from
the floor.
Step 2:
Remove the drawer.
Refer to page 5.
Step 3:
Install the legs to the vanity.
See Figure 3.
Step 4:
Secure the vanity to the horizontal
beam using wood screws. This will add
extra stability for the vanity.
Step 5:
Re-install the drawer.
Refer to page 5.
INSTALLATION SHEET
Figure 3.
ronbow.eu | ronbow.com
Designed By: KURZ KURZ DESIGN | GERMANY
3
161020